RE: SER1 Pedal pins

[prev] [thread] [next] [Date index for 2004/07/22]

If you really mean the cotter pins then they are the same size as used to be
used on bicycle pedals. I got my last ones from a bicycle shop!

Nick. 

-----Original Message-----
From: series1-host@xxxxxxxxx.xxx [mailto:series1-host@xxxxxxxxx.xxx] On
Behalf Of Riaan Botes
Sent: 22 July 2004 22:34
To: series1@xxxxxxxxx.xxx
Subject: Re: SER1 Pedal pins

Thanks Tom. Will first see if the local fastener shop can't help.

Riaan B

Ser 1 80" ('52)
SIII PUP ('76)
Range Rover Classic ('81)
TDi 300 PUP ('96)

----- Original Message ----- 
From: "Tomas Christie" <tomas.christie@xxxxx.xxx>
To: <series1@xxxxxxxxx.xxx>
Sent: Thursday, July 22, 2004 9:12 PM
Subject: Re: SER1 Pedal pins


> For cotter pins I think you mean the clutch pedal only as the brake pedal
is
> splined onto the end of its shaft and fixed with a bolt and nut.  The
clutch
> pedal has a cotter pin (Pt No. 41508) but without measuring one I can't
help
> much.  The brake pedal is splined and held with a bolt (Pt No. 215172)
which is
> 5/16" x 1,13/16".  You need 2 of both the bolt and the cotter pin.
>
> Sorry I can't help more beyond saying that the cotter pins are available
from
> LR Fasteners, but that's not much help to you.
>
> Tom.
>
>
>
> Riaan Botes wrote:
>
> > What size are the cotter pins? that hold the clutch and brake pedals on
the
> > shafts? The originals and new ones I had made up have been put away in a
> > safe place somewhere, so safe I cannot find them.
> >
> > Thanks
> >
> > Riaan B
> >
> > Ser 1 80" ('52)
> > SIII PUP ('76)
> > Range Rover Classic ('81)
> > TDi 300 PUP ('96)
> >
> > To change subscription see www.landrover.net/series1/mail
>
>
>
>
> To change subscription see www.landrover.net/series1/mail
>


To change subscription see www.landrover.net/series1/mail



To change subscription see www.landrover.net/series1/mail