Re: SER1 Engine Mounts

[prev] [thread] [next] [Date index for 2004/09/03]

Hi, I found when you fit new engine mounts, cut off the thread on the engine 
mount, leave it long enough thread for the thickness of the chassis plate 
and the depth of the not.

                                       Alan . uk
>From: "Ian Stuart" <ian.stuart@xx.xx.xx>
>Reply-To: series1@xxxxxxxxx.xxx
>To: <series1@xxxxxxxxx.xxx>
>Subject: Re: SER1 Engine Mounts
>Date: Thu, 2 Sep 2004 23:11:02 +0100
>
> > Is there a trick to removing these beasts? Any advice welcome.
>The mounts?
>
>The brackets from the engine, the bolts from the chassis, or the mountings
>on the chassis....?
>
>The brackets are held on with bolts (locked with tabbed-washers)
>
>The bolts are vertical, into a threaded mount
>
>The chassis mounts are welded to the side-rails.
>
>
>To change subscription see www.landrover.net/series1/mail
>

_________________________________________________________________
Want to block unwanted pop-ups? Download the free MSN Toolbar now!  
http://toolbar.msn.co.uk/


To change subscription see www.landrover.net/series1/mail