Re: SER1 Oil Pressure - Water Temp Gauge

[prev] [thread] [next] [Date index for 2004/11/04]

There is a very early one on ebay which may be of interest to some folks...
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=4501511281&ssPageName=STRK:MESE:IT

Regards
Martin
----- Original Message ----- 
From: "Michael Bishop" <mbishop@xxxx.xx.xx>
To: <series1@xxxxxxxxx.xxx>
Sent: Sunday, October 31, 2004 12:43 AM
Subject: Re: SER1 Oil Pressure - Water Temp Gauge


> Hi
> If I'm not mistaken, the gauge with "Land Rover" on the face only came out
> with the S2.
> Regards
> Mike B
> ----- Original Message -----
> From: "Nick Condon" <ncondon@xxxxxxxx.xx.xx>
> To: <series1@xxxxxxxxx.xxx>
> Sent: Wednesday, October 27, 2004 8:12 PM
> Subject: RE: SER1 Oil Pressure - Water Temp Gauge
>
>
> > Matt,
> >
> > Depends on the year. Early ones up to somewhere in the late 50s or early
> 60s
> > are marked Jaeger but Jaeger were actually owned by and are the same
firm
> as
> > Smiths from round about 1950.
> >
> > A few very early ones are 60 psi / Fahrenheit calibrated.
> > Most in the UK are 100psi / centigrade.
> >
> > Some later ones have Land-Rover on the front - these are still listed by
> PA
> > Blanchard and illustrated on their website under "oddball sales".
> >
> > The 50s models were fitted with a Jaeger marked gauge JA TO 10
> >
> > Nick.
> >
> >
> >
> > To change subscription see www.landrover.net/series1/mail
> >
>
>
> To change subscription see www.landrover.net/series1/mail
>


To change subscription see www.landrover.net/series1/mail