Re: SER1 2.0 Spin-On Filters

[prev] [thread] [next] [Date index for 2005/01/09]

Hi Nick et al,

Thanks for all the info;  so, to review, we have an original looking
canister replacement for 1.6's and early 2.0's that is only available to
LRSOC members outside North America, and no readily available adapter for
the late 2.0's with a RH-mounted filter.  Sounds like an opening exists
for a basic bracket-and-pipes adapter (ie, not original looking but
serviceable) for the early blocks and a ported L-adapter kit for the later
2.0's.

Is this correct?

George E Sollish	Chief Engineer		Auto Gear Equipment
			Project Manager		The Payne Lake Project

On Sun, 9 Jan 2005, lrnick@xxxxxxxx.xxx wrote:

> Date: Sun, 09 Jan 2005 11:18:15 +0000
> From: "lrnick@xxxxxxxx.xxx" <lrnick@xxxxxxxx.xxx>
> Reply-To: series1@xxxxxxxxx.xxx
> To: series1@xxxxxxxxx.xxx
> Subject: Re: SER1 2.0 Spin-On Filters
>
> Hi All
>
> The SI club reproduce an adapter which replaces the by-pass filter on the
> early engines to allow a spin-on filter to be fitted.  It's designed to
> look like the original by-pass filter which it replaces using the same
> fittings.
>
> Regards
>
> Nick Chinery
>
> George E Sollish wrote:
>
> > I was contacted by a member regarding producing a 'spin-on' oil filter
> > adapter for the later 2.0 motors.  Aren't these available already?
> >
> > George E Sollish        Chief Engineer          Auto Gear Equipment
> >                         Project Manager         The Payne Lake Project
> >
> > To change subscription see www.landrover.net/series1/mail
>
>
> To change subscription see www.landrover.net/series1/mail
>
>
>
>

To change subscription see www.landrover.net/series1/mail