Re: SER1 FW: bulkhead

[prev] [thread] [next] [Date index for 2005/01/10]

I wouldn't like to say for sure - it's possible, since the press  
tooling was obviously a bit fragile.   The trouble is that people have  
made some fairly good home made versions over the years which can be  
hard to distinguish.


Jon



On 10 Jan 2005, at 11:53, Tom Wykes wrote:

>
> Jon, Would one have ever been fitted to a 1949?? or is that too early  
> for an aluminium bulkhead?
>
>
> At 11:44 10/01/2005, you wrote:
>> Not sure who the original poster of this is (no web connection at the
>> moment so can't look) but this is known about.  a small number of ali
>> bulkheads were produced every time the press for the steel one broke.
>> A lot seem to have been me in 1952/3 .  My 53 80 has one and I have
>> another 1. 1/2 which i am making one good one from.
>>
>> Jon
>>
>>
>>
>> On 8 Jan 2005, at 19:50, Jeremy Brooks wrote:
>>
>>> -----------------------------------------------------------
>>>
>>> New Message on The Series One Garage
>>>
>>> -----------------------------------------------------------
>>> From: dave
>>> Message 1 in Discussion
>>>
>>> hi all  i have a 1952 802 SERIES ONE AND AM CURRENTLY GETTING IT  
>>> READY
>>> FOR AN MOT I HAVE DISCOVERED THAT IT HAS AN ALLIMINIUM BULKHEAD ?
>>> DOES ANYBODY KNOW Y THIS IS AND IS IT USUAL
>>>
>>> -----------------------------------------------------------
>>>
>>>
>>>
>>> To change subscription see www.landrover.net/series1/mail
>>>
>>>
>> ---------------------------------------------------------------------- 
>> -- ---
>> We are now implementing a new ticketing system to improve response  
>> time
>> and
>> reduce the chances of a request being missed. This does mean a change  
>> of
>> email address, but will help us to help you more efficiently. In  
>> future
>> we
>> ask that new job requests be sent to nsmsjobs@xxxx.xx.xx.xx and  
>> general
>> queries/discussions to nsms@xxxx.xx.xx.xx.
>>
>> Thanks for your cooperation - the NSMS Team.
>> ---------------------------------------------------------------------- 
>> -- ----
>>
>>
>> To change subscription see www.landrover.net/series1/mail
>
>
> Regards.
>
> Tom Wykes.
>
>
>
> PCB Designer
> Cambridge Broadband.
> Tel.+44 (0)1223 703000
> Fax.+44 (0)1223 703001
> DDI. +44 (0)1223 703044
> tw@xxxxxxxxxxxxxxxxxx.xxx
> www.cambridgebroadband.com
>
> If you don't live life on the edge, you're taking up too much space.
>
>
> To change subscription see www.landrover.net/series1/mail
>
>
>
------------------------------------------------------------------------ 
---
We are now implementing a new ticketing system to improve response time  
and
reduce the chances of a request being missed. This does mean a change of
email address, but will help us to help you more efficiently. In future  
we
ask that new job requests be sent to nsmsjobs@xxxx.xx.xx.xx and general
queries/discussions to nsms@xxxx.xx.xx.xx.

Thanks for your cooperation - the NSMS Team.
------------------------------------------------------------------------ 
----


To change subscription see www.landrover.net/series1/mail