Re: SER1 Still begging...

[prev] [thread] [next] [Date index for 2004/07/13]

--Apple-Mail-1--258974014
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
	charset=US-ASCII;
	format=flowed

Bill,

Glad to hear that they have finally arrived.
Don't bother sending me any money to cover postage make a donation to a 
charity instead.
I work in the water industry so a donation to a charity that helps the 
third world to have clean water would be great, though if you cannot 
find one a local (to you) charity would be good.

Thanks
Nigel


On 13 Jul 2004, at 05:07, Bill Lawrence wrote:

> Nigel,
>
> The bits showed up Saturday. Don't worry about the condition. With a 
> little bit of buffing they look just like the ones I already had.
>
> I'll get a check (cheque?) off to you to cover the postage.
>
> Thanks again for your help.
>
> Bill Lawrence
>
> On Jun 29, 2004, at 6:39 AM, nigel.radestock@xxx.xx.xx wrote:
>
>> Bill,
>>
>> They are on their way to you.
>>
>> Nigel
>>
>>
>> On 29 Jun 2004, at 03:47, Bill Lawrence wrote:
>>
>>> Nigel,
>>>
>>> There is quite a bit of difference isn't there. I believe the 
>>> shorter ones will be fine. I'm afraid the longer ones would bottom 
>>> on the studs before they tighten.
>>> They all look the same from the outside so anyone who notices if 
>>> they are incorrect is getting much too intimate with my motor!!!
>>>
>>> Thanks again.
>>>
>>> Bill
>>>
>>> On Jun 28, 2004, at 5:38 AM, nigel.radestock@xxx.xx.xx wrote:
>>>
>>>> Bill,
>>>>
>>>> I have tried several times to email these pictures but they always 
>>>> seem to get lost. I have placed the first one on my web site.
>>>>
>>>> http://www.zen27187.zen.co.uk/
>>>>
>>>> Nigel
>>>>
>>>>
>>>>
>>>>> Bill,
>>>>>
>>>>> I have removed the valve cover nuts and the exhaust clamp.
>>>>> But there seems to be two different sorts holding down my valve 
>>>>> cover (see pic IMG_0863.jpg) and another sort holding down the 
>>>>> side tappet cover (see pic IMG_0864.jpg), the one on the left is 
>>>>> the side plate nut the one on the right from the top cover. Even 
>>>>> though they all have the same part number!
>>>>>
>>>>> Which ones would you like!
>>>>>
>>>>> Nigel
>>>>>
>>>>>  
--Apple-Mail-1--258974014
Content-Transfer-Encoding: 7bit
Content-Type: text/enriched;
	charset=US-ASCII

Bill,


Glad to hear that they have finally arrived.

Don't bother sending me any money to cover postage make a donation to
a charity instead.

I work in the water industry so a donation to a charity that helps the
third world to have clean water would be great, though if you cannot
find one a local (to you) charity would be good.


Thanks

Nigel



On 13 Jul 2004, at 05:07, Bill Lawrence wrote:


<excerpt>Nigel,


The bits showed up Saturday. Don't worry about the condition. With a
little bit of buffing they look just like the ones I already had.


I'll get a check (cheque?) off to you to cover the postage.


Thanks again for your help.


Bill Lawrence


On Jun 29, 2004, at 6:39 AM, nigel.radestock@xxx.xx.xx wrote:


<excerpt>Bill,


They are on their way to you.


Nigel



On 29 Jun 2004, at 03:47, Bill Lawrence wrote:


<excerpt>Nigel,


There is quite a bit of difference isn't there. I believe the shorter
ones will be fine. I'm afraid the longer ones would bottom on the
studs before they tighten. 

They all look the same from the outside so anyone who notices if they
are incorrect is getting much too intimate with my motor!!!


Thanks again.


Bill


On Jun 28, 2004, at 5:38 AM, nigel.radestock@xxx.xx.xx wrote:


<excerpt><bigger>Bill,


I have tried several times to email these pictures but they always
seem to get lost. I have placed the first one on my web site.


</bigger>http://www.zen27187.zen.co.uk/


Nigel




<excerpt><bigger>Bill,


I have removed the valve cover nuts and the exhaust clamp.

But there seems to be two different sorts holding down my valve cover
(see pic IMG_0863.jpg) and another sort holding down the side tappet
cover (see pic IMG_0864.jpg), the one on the left is the side plate
nut the one on the right from the top cover. Even though they all have
the same part number!


Which ones would you like!


Nigel


 </bigger></excerpt></excerpt></excerpt></excerpt></excerpt>
--Apple-Mail-1--258974014--


To change subscription see www.landrover.net/series1/mail