Re: SER1 Re: Ser 1 Aussie 109

[prev] [thread] [next] [Date index for 2004/11/27]

Hi

Thanks for that Diana. Will be in touch later. Am away a few days till
Wednesday.

Cheers

Martin
----- Original Message ----- 
From: <dianaa@xxxxxxxx.xxx.xx>
To: "MARTIN" <m@xxxx.xxx>
Cc: <series1@xxxxxxxxx.xxx>
Sent: Saturday, November 27, 2004 3:06 AM
Subject: SER1 Re: Ser 1 Aussie 109


> Martin
>
> I forgot to mention on my last post that the Aussie Dollar (otherwise
known as the
> South West Pacific Peso) is only worth about 41 UK Pence so the Maxidrive
> replacement axles would only cost about 170 UK pounds.  You should be able
to get
> the 24 spline drive flanges from Craddocks or Dunsfolds or any Land Rover
breaker
> who recycles the later Series III etc Land Rovers.
>
> I am 99.9999% sure that the narrow Maxidrive axles have the 10 splines on
the diff end.
>
> Diana
>
> > MARTIN <m@xxxx.xxx> wrote:
> >
> > Hi Diana
> >
> > Just a thought, forgive me for asking, but would you be interested in
> > retreiving the fully floating rear half shafts and posting them to me
> > in the UK?...for a suitable fee of course! Appologies if you live no
> > where near the place!
> >
> > I tried the link you mentioned and their reply is below. I haven't
> > taken it any further because of the fact they are 24 spline and the
> > price! Not sure if they are 10 spline at the diff end or not.
> >
> > From maxidrive@xxxxxxx.xxx.xx info@xxxxxxxx.xxx.xx
> > Hello Martin,
> > Yes we do make a rear axle to suit the narrow track for the 80inch up
> > to
> > 1959.
> > But you will require 24 spline drive flanges . For these you can either
> > use
> > the genuine series 24 spline drive flanges or our heavy duty ones with
> > the
> > screw on caps.
> > A Pair of axles  will cost  410.00  AUD
> > A pair of our d/flanges  MDE571       260.00AUD
> > Plus freight
> > Regards Paula
> >
> > Cheers
> >
> > Martin
>
> To change subscription see www.landrover.net/series1/mail
>


To change subscription see www.landrover.net/series1/mail