Re: SER1 new braking system

[prev] [thread] [next] [Date index for 2005/03/19]

Hi Nick,

Thanks for the info, I'll certainly give that a try.

Cheers

Bob

----- Original Message ----- 
From: "Nick Condon" <ncondon@xxxxxxxx.xx.xx>
To: <series1@xxxxxxxxx.xxx>
Sent: Saturday, March 19, 2005 9:51 PM
Subject: RE: SER1 new braking system


> Bob,
>
> On the assumption that the master cylinder is properly rebuilt and that
the
> problem is just an airlock:
>
> If you have an old reservoir cap solder a bicycle valve into the top and
> pressurise the reservoir with a bicycle pump. I have had to do this once
or
> twice to get odd brake systems to prime. Once the master cylinder is full
> then all will be well. I have somewhere an 80" cap with this fitting which
> suggests that I had the same problem once.
>
> Nick.
>
> ________________________________________
>
> Certainly stuck on this one, any ideas would be most welcome indeed.
>
> Cheers
>
> Bob
>
>
>
> To change subscription see www.landrover.net/series1/mail
>


To change subscription see www.landrover.net/series1/mail