RE: SER1 smiths heater fittings

[prev] [thread] [next] [Date index for 2005/07/23]

Tony - here is a supplier for a steel version of the adaptor - the nuts are
around and the nipples can be made by anyone with a lathe - pipe of very
similar size is available from the model engineering suppliers. Bending it
is difficult because it does not fit on the modern benders and you would
have to make up tools.

http://www.bsr-aerotek.com/adapters14.htm

Nick. 


________________________________________
From: series1-host@xxxxxxxxx.xxx [mailto:series1-host@xxxxxxxxx.xxx] On
Behalf Of Tony Boyle
Sent: 23 July 2005 10:20
To: series1@xxxxxxxxx.xxx
Subject: SER1 smiths heater fittings

Hi,

Can anyone tell me what size/ type of thread is used on the water pump inlet

pipe where the smiths heater pipe connects into it. The parts catalogue 
shows a reducing union part no. 213276. I can't get this or the pipes so I 
thought I would try my local engineering supplier for a converter to fit 
standard plumbing copper pipe. Unless anyone knows where I can get the
original 
parts?

Thanks

Tony Boyle. 


To change subscription see www.landrover.net/series1/mail