Re: SER1 Spring bushings for 80"

[prev] [thread] [next] [Date index for 2005/09/06]

Rob Modica wrote:
> I'm going to change the spring bushings on my 1951 80".  It has the 2.5" 
> springs in front and the 2" in the rear.  Can I use Series II or IIA 
> poly bushings for this application?
The front is fine.... standard series spring width.

The rears can be made to fit... but you need to trim the metal center 
core of the polybush, and the bushes themselves (remember to make each 
half 2mm shorter than half the depth of the spring)

I had to lever the front spring-mounts apart a bit, but everything went 
together pretty easily


To change subscription see www.landrover.net/series1/mail