Re: SER1 propshaft for 80

[prev] [thread] [next] [Date index for 2005/11/05]

From: Ian Stuart
Subject: Re: SER1 propshaft for 80
Date: 19:03 on 05 Nov 2005

Danesbury80/Bob Phillips wrote:
> Hi All,
>  
> The rebuild of our 80 is coming on well.
> The engine and gearbox has just been fitted as has the rear propshaft, 
> however we now need a front propshaft.
>  
> Has any one a lead as to were I can obtain one of these .
Take a standard 88" one and shorten it?
(taking the long side of the propshaft, you grind off the weld holding 
the plug in the end, shorten the tube, and weld the plug back in...)

To change subscription see www.landrover.net/series1/mail

(message missing)

SER1 propshaft for 80
Danesbury80/Bob Phillips 17:17 on 05 Nov 2005

Re: SER1 propshaft for 80
Ian Stuart 19:03 on 05 Nov 2005

AW: SER1 propshaft for 80
Ulrico Becker 07:21 on 08 Nov 2005

RE: SER1 propshaft for 80
Tom Tollefson 13:58 on 08 Nov 2005

RE: SER1 propshaft for 80
Bob Phillips /Danesbury80 16:07 on 08 Nov 2005

SER1 propshaft for 80
Danesbury80/Bob Phillips 17:35 on 05 Nov 2005

RE: SER1 propshaft for 80
Gilbert, Ben 16:00 on 08 Nov 2005

Re: SER1 propshaft for 80
The Danesbury80 16:16 on 08 Nov 2005

Generated at 20:56 on 09 Nov 2005 by mariachi v0.52