Re: SER1 Flywheel in Gemany

[prev] [thread] [next] [Date index for 2006/01/03]

Uli in Germany;
and Ian Stuart in Edinburgh;
and Eighty Inch in Oz;
Thanks for the offers; I still have some leads in North America; I'll let 
you know.
I don't know what the difference is between the flywheels on a  2 L 
spreadbore and a siamese bore ( the 1.6 L and the 2.0 L siamese use the same 
one); I hope to get 2 side by side to compare.
Keith.
----- Original Message ----- 
From: "Ian Stuart" <ian@xxxxxxxxxxxxxxxx.xxx>
To: <series1@xxxxxxxxx.xxx>
Sent: Monday, January 02, 2006 4:17 PM
Subject: Re: SER1 Flywheel in Gemany


> Eighty Inch wrote:
>> Uli
>>  Did your flywheel come off a Siamese bore 2 litre?  That is the one 
>> Keith is looking for.  I know the part number is different for the later 
>> spread bore flywheel.
> Is there some definitive way to tell the different, my physical 
> examination of the flywheel?
>
> All I can see on the one I have here is that it has "TDC", "FA", "8" & 
> "15", and the bevel on the ring-teeth are on the engine-side.
>
> --
> Ian
>
> To change subscription see www.landrover.net/series1/mail
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.371 / Virus Database: 267.14.9/216 - Release Date: 12/29/2005
>
> 



        -- 
        No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.14.9/216 - Release Date: 12/29/2005


To change subscription see www.landrover.net/series1/mail