Re: SER1 roller fairhead

[prev] [thread] [next] [Date index for 2005/08/07]

Hi Tom,

That's the spirit -- leave Tuesday, Petersham before dark Friday!  Don't 
understand the bit about sealing off the leaks, though.  In my TT rain 
comes in over the doors, over the windscreen, through the holes in the 
floor and from the open flap at the rear -- I'm thinking of putting a 
second wiper blade on the inside.  Do like I do, wear a hat -- but get one 
that's better looking.

See you in Petersham.

George E Sollish	Chief Engineer		Auto Gear Equipment
 			Project Manager		The Payne Lake Project

On Sun, 7 Aug 2005 TBache9248@xxx.xxx wrote:

> Date: Sun, 7 Aug 2005 17:32:13 EDT
> From: TBache9248@xxx.xxx
> Reply-To: series1@xxxxxxxxx.xxx
> To: series1@xxxxxxxxx.xxx
> Subject: SER1 roller fairhead
> 
> HI Everyone,
> Does anyone have a capstan winch roller fairhead mounted on an 86/88?   Mine
> is the type with the alloy ends. I "offered it up" to the bumper for a  look,
> and can't see how it is to mount as the castings appear to hang below the
> bumper, and lower mounting holes would be right at the lower flat part on the
> bumper.  I have a picture here to e-mail off line to further the  discussion.  I
> tried the parts on a later S111 bumper and doesn't fit them  either as that
> bumper is too tall and deeper, the opposite problem.
>
> Our plan is to drive UDF to Mass. for the Series One event this weekend
> coming, so I had the roof off and replaced the 50 year old weatherstrip under  the
> windscreen.  Going to have a go at the door gaps next as Mira doesn't  like
> the drafts and the mobile shower when it rains!
>
>
> Tom Bache
> Avondale, PA
> USA
>

To change subscription see www.landrover.net/series1/mail