Re: SER1 Minerva Wiring

[prev] [thread] [next] [Date index for 2005/10/04]

Hi Coen,

Yellow?  All my wires are black!  I do have copies of the parts book and 
numbered wiring diagram (without the key).  The real question is whether 
someone on your side can make new Minerva wiring harnesses, preferably 
with wire/trace colors so I can follow along ...  The usual suppliers in 
England and Australia say 'no'.

Thanks.

George E Sollish	Chief Engineer		Auto Gear Equipment
 			Project Manager		The Payne Lake Project

On Tue, 4 Oct 2005, Coen Caminada wrote:

> Date: Tue, 04 Oct 2005 17:30:59 +0200
> From: Coen Caminada <Coen@xxxxxxxx.xxxx>
> Reply-To: series1@xxxxxxxxx.xxx
> To: series1@xxxxxxxxx.xxx
> Subject: Re: SER1 Minerva Wiring
> 
> George,
>
> The original wiring of the Minerva was made of plastic coated copper, all the 
> wires colored yellow ;-( except some wires in the ?cockpit housing?.
>
> Do you have any Minerva books?
> In the ?handleiding? (= manual) is a wiring schematic, but the wires are 
> numbered and not color coded??.;-(
> The same schematic is also in the ?handleiding voor onderhoud? (= manual for 
> maintenance) and in the ?organieke maintenance,?( workshop manual?) witch 
> also contains a explanation of the numbers in the wiring schematic.
>
> I hope this helps a bit,
>
> Coen
>
>
> George E Sollish wrote:
>
>> Bit of exotica for most, but I'm hoping one of our Minerva owners has an 
>> original loom or a color-coded wiring diagram :-)
>> 
>> Can anyone advise the correct color/trace for the following wires in the 
>> Minerva turn signal harness?
>> 
>> Control Box 'E' post to Flasher post (1)
>> 
>> Flasher post (1) to Switch post (1)
>> 
>> Flasher post (2) to Switch post (3)
>> 
>> Flasher post (3) to Fuse Box
>> 
>> Switch post (2) to Bulkhead Junction (left)
>> 
>> Bulkhead Junction (left) to Front Signal Lamp (left)
>> 
>> Bulkhead Junction (left) to Trailer Junction (left)
>> 
>> Trailer Junction (left) to Rear Signal Lamp (left)
>> 
>> Switch post (4) to Bulkhead Junction (right)
>> 
>> Bulkhead Junction (right) to Front Signal Lamp (right)
>> 
>> Bulkhead Junction (right) to Trailer Junction (right)
>> 
>> Trailer Junction (right) to Rear Signal Lamp (right)
>> 
>> Thanks.
>> 
>> George E Sollish Chief Engineer Auto Gear Equipment
>> Project Manager The Payne Lake Project
>> 
>> To change subscription see www.landrover.net/series1/mail
>> 
>> 
> The original wirering
>
> To change subscription see www.landrover.net/series1/mail
>
>
>
>
>

To change subscription see www.landrover.net/series1/mail