Re: SER1 Minerva Wiring

[prev] [thread] [next] [Date index for 2005/10/04]

The sleeves are black, the inner wires are yellow and blue (just 
discovered)  I do not know someone who does the minerva loom, but the 
wires are yust like modern wires, so you shoud be able to copy the loom 
yourself. or buy a series one one with sidelights.

Coen

George E Sollish wrote:

> Hi Coen,
>
> Yellow?  All my wires are black!  I do have copies of the parts book 
> and numbered wiring diagram (without the key).  The real question is 
> whether someone on your side can make new Minerva wiring harnesses, 
> preferably with wire/trace colors so I can follow along ...  The usual 
> suppliers in England and Australia say 'no'.
>
> Thanks.
>
> George E Sollish    Chief Engineer        Auto Gear Equipment
>             Project Manager        The Payne Lake Project
>
> On Tue, 4 Oct 2005, Coen Caminada wrote:
>
>> Date: Tue, 04 Oct 2005 17:30:59 +0200
>> From: Coen Caminada <Coen@xxxxxxxx.xxxx>
>> Reply-To: series1@xxxxxxxxx.xxx
>> To: series1@xxxxxxxxx.xxx
>> Subject: Re: SER1 Minerva Wiring
>>
>> George,
>>
>> The original wiring of the Minerva was made of plastic coated copper, 
>> all the wires colored yellow ;-( except some wires in the ?cockpit 
>> housing?.
>>
>> Do you have any Minerva books?
>> In the ?handleiding? (= manual) is a wiring schematic, but the wires 
>> are numbered and not color coded??.;-(
>> The same schematic is also in the ?handleiding voor onderhoud? (= 
>> manual for maintenance) and in the ?organieke maintenance,?( workshop 
>> manual?) witch also contains a explanation of the numbers in the 
>> wiring schematic.
>>
>> I hope this helps a bit,
>>
>> Coen
>>
>>
>> George E Sollish wrote:
>>
>>> Bit of exotica for most, but I'm hoping one of our Minerva owners 
>>> has an original loom or a color-coded wiring diagram :-)
>>>
>>> Can anyone advise the correct color/trace for the following wires in 
>>> the Minerva turn signal harness?
>>>
>>> Control Box 'E' post to Flasher post (1)
>>>
>>> Flasher post (1) to Switch post (1)
>>>
>>> Flasher post (2) to Switch post (3)
>>>
>>> Flasher post (3) to Fuse Box
>>>
>>> Switch post (2) to Bulkhead Junction (left)
>>>
>>> Bulkhead Junction (left) to Front Signal Lamp (left)
>>>
>>> Bulkhead Junction (left) to Trailer Junction (left)
>>>
>>> Trailer Junction (left) to Rear Signal Lamp (left)
>>>
>>> Switch post (4) to Bulkhead Junction (right)
>>>
>>> Bulkhead Junction (right) to Front Signal Lamp (right)
>>>
>>> Bulkhead Junction (right) to Trailer Junction (right)
>>>
>>> Trailer Junction (right) to Rear Signal Lamp (right)
>>>
>>> Thanks.
>>>
>>> George E Sollish Chief Engineer Auto Gear Equipment
>>> Project Manager The Payne Lake Project
>>>
>>> To change subscription see www.landrover.net/series1/mail
>>>
>>>
>> The original wirering
>>
>> To change subscription see www.landrover.net/series1/mail
>>
>>
>>
>>
>>
>
> To change subscription see www.landrover.net/series1/mail
>
>


To change subscription see www.landrover.net/series1/mail