SER1 clutch and brake pedals 80"

[prev] [thread] [next] [Date index for 2005/02/26]

Hello Diana,

Thank you for the picture of the set-up with the brake and clutch shafts.

Can certainly see what parts are required and where they go now.

Have just finished installing the shafts into new bushes, the pic was a
great help.

Have also located a set of pedals, next step new brake pipes.

The master cylinder that we have looks repairable.

Many thanks

Bob Phillips

----- Original Message ----- 
From: "Diana Alan" <dianaa@xxxxxxxx.xxx.xx>
To: <jagcat@xxxxxxx.xx.xx>
Sent: Friday, February 25, 2005 9:51 PM
Subject: Fw: SER1 clutch and brake pedals 80"


> G'day Bob
>
> The attached jpg is from the original 1951 Operations Manual (Owners
Manual)
> and shows the brake and clutch levers on the inside of the chassis - the
> other side is merely clamped or cotter pinned onto the respective shaft.
>
> Cheers
>
> Diana
> Australia
> ----- Original Message ----- 
> From: "Bob Phillips" <jagcat@xxxxxxx.xx.xx>
> To: "Series1@xxxxxxxxx.xxx" <series1@xxxxxxxxx.xxx>
> Sent: Saturday, February 26, 2005 4:25 AM
> Subject: SER1 clutch and brake pedals 80"
>
>
>
> Hi,
>
> 1950 80"
>
> Can anybody kindly point me in the direction, of pictures of the clutch
and
> brake pedal assemblies, around the area were they fit with the chassis
> please.
>
> Trying to work out what is missing and were it all fits.
>
> The pics in the workshop book show 2 pedals on the same shaft, however
this
> looks like the clutch pedal and the brake pedal are on separate shafts.
>
> Many thanks
>
> Bob
>
>
> To change subscription see www.landrover.net/series1/mail
>
>


To change subscription see www.landrover.net/series1/mail