RE: SER1 Speedo Cable

[prev] [thread] [next] [Date index for 2005/06/24]

Hi Nick,

On mine the cable is retained by three annoyingly tiny screws; is that the 
design you're thinking of?  The cable that broke was definitely too long, 
so it wasn't original for my '52.  I'm guessing it was for an 86" -- their 
cables exit the transfer case toward the centerline -- but I could use 
another like it with a bit of care if I could remember where I got it :-)

George E Sollish	Chief Engineer		Auto Gear Equipment
 			Project Manager		The Payne Lake Project

On Fri, 24 Jun 2005, Nick Condon wrote:

> Date: Fri, 24 Jun 2005 20:04:23 +0100
> From: Nick Condon <ncondon@xxxxxxxx.xx.xx>
> Reply-To: series1@xxxxxxxxx.xxx
> To: series1@xxxxxxxxx.xxx
> Subject: RE: SER1 Speedo Cable
> 
> George,
>
> I think it depends on the year - if the 80" has the cable fitting to the
> gearbox with three small bolts then I think it is OK.
>
> Not certain though!
>
> Nick.
>
> -----Original Message-----
> From: series1-host@xxxxxxxxx.xxx [mailto:series1-host@xxxxxxxxx.xxx] On
> Behalf Of George E Sollish
> Sent: 24 June 2005 19:41
> To: Series 1 List
> Subject: SER1 Speedo Cable
>
> Can someone confirm or deny that the speedo cable assy from a II/IIA
> (Rovers North #RNE614) will fit my 80" (other than length, which I know
> should be shorter)?
>
> Thanks.
>
> George E Sollish	Chief Engineer		Auto Gear Equipment
> 			Project Manager		The Payne Lake Project
>
> To change subscription see www.landrover.net/series1/mail
>
>
>
>
> To change subscription see www.landrover.net/series1/mail
>
>
>
>

To change subscription see www.landrover.net/series1/mail