Re: SER1 Speedo Cable

[prev] [thread] [next] [Date index for 2005/06/25]

George

According to the 1948 - 53 Parts Catalogue (Part number4051), the cable
inner and outer are R234536 & R234537.

According to the 1954 - 57 Parts Catalogue (Part number4107), the cable
inner and outer are R234536 & R234537, that would make them the same part in
both the late 80" and the 86"/88' & 107"/109" Series 1 models.

and

According to a popular eBay LR parts vendor the later Land Rover part number
RTC3484 SPEEDOMETER CABLE 1950 - 1971.

So I guess they are the same.

Cheers
EIR

----- Original Message ----- 
From: "Charlie" <g.generators@xxxxxxx.xxx>
To: <series1@xxxxxxxxx.xxx>
Sent: Saturday, June 25, 2005 7:47 AM
Subject: Re: SER1 Speedo Cable


Hi George:  Your Minervas brother recieved his new spedo cable from Les at
Rovers North and it works !    Charlie
----- Original Message ----- 
From: "George E Sollish" <gsollish@xxxxxxxx.xxx>
To: <series1@xxxxxxxxx.xxx>
Sent: Friday, June 24, 2005 3:29 PM
Subject: RE: SER1 Speedo Cable


> Hi Nick,
>
> On mine the cable is retained by three annoyingly tiny screws; is that the
> design you're thinking of?  The cable that broke was definitely too long,
> so it wasn't original for my '52.  I'm guessing it was for an 86" -- their
> cables exit the transfer case toward the centerline -- but I could use
> another like it with a bit of care if I could remember where I got it :-)
>
> George E Sollish Chief Engineer Auto Gear Equipment
>  Project Manager The Payne Lake Project
>
> On Fri, 24 Jun 2005, Nick Condon wrote:
>
>> Date: Fri, 24 Jun 2005 20:04:23 +0100
>> From: Nick Condon <ncondon@xxxxxxxx.xx.xx>
>> Reply-To: series1@xxxxxxxxx.xxx
>> To: series1@xxxxxxxxx.xxx
>> Subject: RE: SER1 Speedo Cable
>>
>> George,
>>
>> I think it depends on the year - if the 80" has the cable fitting to the
>> gearbox with three small bolts then I think it is OK.
>>
>> Not certain though!
>>
>> Nick.
>>
>> -----Original Message-----
>> From: series1-host@xxxxxxxxx.xxx [mailto:series1-host@xxxxxxxxx.xxx] On
>> Behalf Of George E Sollish
>> Sent: 24 June 2005 19:41
>> To: Series 1 List
>> Subject: SER1 Speedo Cable
>>
>> Can someone confirm or deny that the speedo cable assy from a II/IIA
>> (Rovers North #RNE614) will fit my 80" (other than length, which I know
>> should be shorter)?
>>
>> Thanks.
>>
>> George E Sollish Chief Engineer Auto Gear Equipment
>> Project Manager The Payne Lake Project
>>
>> To change subscription see www.landrover.net/series1/mail
>>
>>
>>
>>
>> To change subscription see www.landrover.net/series1/mail
>>
>>
>>
>>
>
> To change subscription see www.landrover.net/series1/mail
>


To change subscription see www.landrover.net/series1/mail




To change subscription see www.landrover.net/series1/mail