RE: SER1 Speedo Cable

[prev] [thread] [next] [Date index for 2005/06/25]

 Gerorge:

You may be able to get a NOS S1 80 speedo cable from the Land Rover Orphanage: http://www.landroverorphanage.co.uk 

Karen Sindir

---- George E Sollish <gsollish@xxxxxxxx.xxx> wrote: 
> Hi Nick,
> 
> On mine the cable is retained by three annoyingly tiny screws; is that the 
> design you're thinking of?  The cable that broke was definitely too long, 
> so it wasn't original for my '52.  I'm guessing it was for an 86" -- their 
> cables exit the transfer case toward the centerline -- but I could use 
> another like it with a bit of care if I could remember where I got it :-)
> 
> George E Sollish	Chief Engineer		Auto Gear Equipment
>  			Project Manager		The Payne Lake Project
> 
> On Fri, 24 Jun 2005, Nick Condon wrote:
> 
> > Date: Fri, 24 Jun 2005 20:04:23 +0100
> > From: Nick Condon <ncondon@xxxxxxxx.xx.xx>
> > Reply-To: series1@xxxxxxxxx.xxx
> > To: series1@xxxxxxxxx.xxx
> > Subject: RE: SER1 Speedo Cable
> > 
> > George,
> >
> > I think it depends on the year - if the 80" has the cable fitting to the
> > gearbox with three small bolts then I think it is OK.
> >
> > Not certain though!
> >
> > Nick.
> >
> > -----Original Message-----
> > From: series1-host@xxxxxxxxx.xxx [mailto:series1-host@xxxxxxxxx.xxx] On
> > Behalf Of George E Sollish
> > Sent: 24 June 2005 19:41
> > To: Series 1 List
> > Subject: SER1 Speedo Cable
> >
> > Can someone confirm or deny that the speedo cable assy from a II/IIA
> > (Rovers North #RNE614) will fit my 80" (other than length, which I know
> > should be shorter)?
> >
> > Thanks.
> >
> > George E Sollish	Chief Engineer		Auto Gear Equipment
> > 			Project Manager		The Payne Lake Project
> >
> > To change subscription see www.landrover.net/series1/mail
> >
> >
> >
> >
> > To change subscription see www.landrover.net/series1/mail
> >
> >
> >
> >
> 
> To change subscription see www.landrover.net/series1/mail
> 


To change subscription see www.landrover.net/series1/mail