RE: SER1 carb

[prev] [thread] [next] [Date index for 2005/05/06]

From: George E Sollish
Subject: RE: SER1 carb
Date: 12:56 on 06 May 2005

Hi Keith,

No adapter required, but if memory serves the throttle lever has to be 
swapped to the other end of the rod.  On my 2.0 the lever at full throw 
touched the manifold, which I cured by grinding a touch (2-3 mm) off the 
latter; bending the lever might work also.

Re places to buy, DAP in vermont has them on the shelf as 2.25 conversion 
kits.

Re Ben's question, don't know if the conversion works as well on the 1.6.

George E Sollish	Chief Engineer		Auto Gear Equipment
 			Project Manager		The Payne Lake Project

To change subscription see www.landrover.net/series1/mail

(message missing)

SER1 carb
Ian Balcom 15:53 on 05 May 2005

RE: SER1 carb
Mark Woodward 16:30 on 05 May 2005

Re: SER1 carb
azwriter 17:36 on 05 May 2005

Re: SER1 carb
Peter Vollers 18:30 on 05 May 2005

RE: SER1 carb
Gilbert, Ben 18:48 on 05 May 2005

Re: SER1 carb
Peter Vollers 12:01 on 06 May 2005

Re: SER1 carb
GRAHAM WOOD 21:52 on 05 May 2005

Re: SER1 carb
Ben Pooley 23:23 on 05 May 2005

Re: SER1 carb
Ian Balcom 00:25 on 06 May 2005

Re: SER1 carb
Ian Balcom 04:26 on 06 May 2005

Re: SER1 carb
GRAHAM WOOD 09:15 on 06 May 2005

Re: SER1 carb
Peter Vollers 12:00 on 06 May 2005

Re: SER1 carb
Michael Bishop 18:30 on 06 May 2005

RE: SER1 carb
Keith Elliott 10:40 on 06 May 2005

Re: SER1 carb
GRAHAM WOOD 12:06 on 06 May 2005

RE: SER1 carb
Keith Elliott 14:02 on 07 May 2005

RE: SER1 carb
George E Sollish 12:56 on 06 May 2005

Re: SER1 carb
Simon Dewing 23:52 on 06 May 2005

Re: SER1 carb
20:00 on 07 May 2005