Re: SER1 carb

[prev] [thread] [next] [Date index for 2005/05/06]

From: Simon Dewing
Subject: Re: SER1 carb
Date: 23:52 on 06 May 2005

Any chance any of you guys swapping carbs here in the US have a scrap solex
I can steal a few parts from?

I am missing the choke (cold start) lever and associated nut / lock washer,

Three screws from the accelerator pump (2 long, 1 short)
The nipple and olive for the vacuum advance pipe.
The spring from the accelerator pump arm.

My 80 (1600) was fitted with a slightly oversize Carter YF (1 1/2 inch Vs 1
5/16) which is available for swap if you want to try this upgrade.

I am restoring to origional spec and have an unworn 1600 Solex but its
missing the above parts.

Rgds

Simon


To change subscription see www.landrover.net/series1/mail

(message missing)

SER1 carb
Ian Balcom 15:53 on 05 May 2005

RE: SER1 carb
Mark Woodward 16:30 on 05 May 2005

Re: SER1 carb
azwriter 17:36 on 05 May 2005

Re: SER1 carb
Peter Vollers 18:30 on 05 May 2005

RE: SER1 carb
Gilbert, Ben 18:48 on 05 May 2005

Re: SER1 carb
Peter Vollers 12:01 on 06 May 2005

Re: SER1 carb
GRAHAM WOOD 21:52 on 05 May 2005

Re: SER1 carb
Ben Pooley 23:23 on 05 May 2005

Re: SER1 carb
Ian Balcom 00:25 on 06 May 2005

Re: SER1 carb
Ian Balcom 04:26 on 06 May 2005

Re: SER1 carb
GRAHAM WOOD 09:15 on 06 May 2005

Re: SER1 carb
Peter Vollers 12:00 on 06 May 2005

Re: SER1 carb
Michael Bishop 18:30 on 06 May 2005

RE: SER1 carb
Keith Elliott 10:40 on 06 May 2005

Re: SER1 carb
GRAHAM WOOD 12:06 on 06 May 2005

RE: SER1 carb
Keith Elliott 14:02 on 07 May 2005

RE: SER1 carb
George E Sollish 12:56 on 06 May 2005

Re: SER1 carb
Simon Dewing 23:52 on 06 May 2005

Re: SER1 carb
20:00 on 07 May 2005