Re: SER1 25D Distributor

[prev] [thread] [next] [Date index for 2005/08/03]

From: Eighty Inch
Subject: Re: SER1 25D Distributor
Date: 23:11 on 03 Aug 2005
George

This is all very frustrating for you.

I have to agree with Tom the cap for your vehicle is Rover Part 261240
(Lucas Part 415298).

If you have a cap that is too small for your distributor and it came out of
a box marked 261240.  Then the cap you have is a Rover Part 245004 (Lucas
Part 418871) and was packed in the wrong box.

Regards
Diana
----- Original Message ----- 
From: "Tom Tollefson" <tollefson@xxxxxxx.xx>
To: <series1@xxxxxxxxx.xxx>
Sent: Thursday, August 04, 2005 5:09 AM
Subject: RE: SER1 25D Distributor


George
The siamese bore engine has the oil filter element on the exhaust side , in
front of the starter. the standard distributor for that engine needs the 261
240 cap.
The spread bore engine has the filter unit ( with replacable paper element)
on the intake side under the manifold. It's standard distributor needs the
245 004 cap ( as shown on the TLR web site)
You may have purchased a spread bore cap in a siamese bore box.
I am not sure wether the later and more spares friendly distributor is
"direct swappable" or if it needs some modifications.
I would think the list has some experts on that topic.

Tom T




To change subscription see www.landrover.net/series1/mail

(message missing)

SER1 25D Distributor
George E Sollish 16:17 on 03 Aug 2005

Re: SER1 25D Distributor
Eighty Inch 17:25 on 03 Aug 2005

Re: SER1 25D Distributor
George E Sollish 18:25 on 03 Aug 2005

RE: SER1 25D Distributor
Tom Tollefson 19:09 on 03 Aug 2005

Re: SER1 25D Distributor
Eighty Inch 23:11 on 03 Aug 2005

Re: SER1 25D Distributor
Eighty Inch 23:41 on 03 Aug 2005

RE: SER1 25D Distributor
Tom Tollefson 05:18 on 04 Aug 2005

Re: SER1 25D Distributor
Wayne Perrin 11:49 on 04 Aug 2005

RE: SER1 25D Distributor
George E Sollish 11:51 on 04 Aug 2005

Re: SER1 25D Distributor
Eighty Inch 12:43 on 04 Aug 2005

Re: SER1 25D Distributor
George E Sollish 12:18 on 05 Aug 2005

Re: SER1 25D Distributor
Eighty Inch 13:04 on 05 Aug 2005

Re: SER1 25D Distributor
George E Sollish 13:33 on 05 Aug 2005

RE: SER1 25D Distributor
Nick Condon 12:36 on 04 Aug 2005

Re: SER1 25D Distributor
Eighty Inch 13:01 on 04 Aug 2005

Re: SER1 25D Distributor
Tony Gammage 00:44 on 06 Aug 2005

Generated at 21:03 on 07 Aug 2005 by mariachi v0.52