RE: SER1 25D Distributor

[prev] [thread] [next] [Date index for 2005/08/04]

From: Nick Condon
Subject: RE: SER1 25D Distributor
Date: 12:36 on 04 Aug 2005

George,

All the common 25D distributors are effectively identical. Any cap which
fits will work. All caps have the same size base. The direction in which the
leads exit is all that changes. Some come out vertically and there are at
least three variations with horizontal leads. The difference between these
is simply the direction of exit.

The 25D that Rover supplied for the Land Rover had horizontal leads. I
think, almost certain but not quite sure, that the leads faced outwards over
the exhaust manifold. 

Nick.   


To change subscription see www.landrover.net/series1/mail




To change subscription see www.landrover.net/series1/mail

(message missing)

SER1 25D Distributor
George E Sollish 16:17 on 03 Aug 2005

Re: SER1 25D Distributor
Eighty Inch 17:25 on 03 Aug 2005

Re: SER1 25D Distributor
George E Sollish 18:25 on 03 Aug 2005

RE: SER1 25D Distributor
Tom Tollefson 19:09 on 03 Aug 2005

Re: SER1 25D Distributor
Eighty Inch 23:11 on 03 Aug 2005

Re: SER1 25D Distributor
Eighty Inch 23:41 on 03 Aug 2005

RE: SER1 25D Distributor
Tom Tollefson 05:18 on 04 Aug 2005

Re: SER1 25D Distributor
Wayne Perrin 11:49 on 04 Aug 2005

RE: SER1 25D Distributor
George E Sollish 11:51 on 04 Aug 2005

Re: SER1 25D Distributor
Eighty Inch 12:43 on 04 Aug 2005

Re: SER1 25D Distributor
George E Sollish 12:18 on 05 Aug 2005

Re: SER1 25D Distributor
Eighty Inch 13:04 on 05 Aug 2005

Re: SER1 25D Distributor
George E Sollish 13:33 on 05 Aug 2005

RE: SER1 25D Distributor
Nick Condon 12:36 on 04 Aug 2005

Re: SER1 25D Distributor
Eighty Inch 13:01 on 04 Aug 2005

Re: SER1 25D Distributor
Tony Gammage 00:44 on 06 Aug 2005

Generated at 21:03 on 07 Aug 2005 by mariachi v0.52