Re: SER1 vibration dampener removal

[prev] [thread] [next] [Date index for 2005/05/30]

From: Allan Harding
Subject: Re: SER1 vibration dampener removal
Date: 01:13 on 30 May 2005

    Bolt a piece of bar across the flywheel, using the clutch mounting 
bolt holes, tighten the bolts so that the tapped holes are not damaged 
(may require spacers between the bar and the flywheel to clear the 
aluminium casting around the flywheel, have an assistant hold the bar 
while you try to undo the nut. You may have to hammer the socket bar or 
spanner to loosen the nut.
       Cheers
    Allan
    Canberra, Australia


To change subscription see www.landrover.net/series1/mail

(message missing)

SER1 vibration dampener removal
Ian Balcom 00:37 on 30 May 2005

Re: SER1 vibration dampener removal
Allan Harding 01:13 on 30 May 2005

Re: SER1 vibration dampener removal
Chris Storm 17:25 on 30 May 2005

Re: SER1 vibration dampener removal
Ian Balcom 14:52 on 31 May 2005

Re: SER1 vibration dampener removal
Chris Storm 20:45 on 31 May 2005

RE: SER1 vibration dampener removal
Tom Tollefson 21:25 on 31 May 2005

Re: SER1 vibration dampener removal
Allan Harding 22:18 on 31 May 2005

Re: SER1 vibration dampener removal
Tomas Christie 23:32 on 31 May 2005

Re: SER1 vibration dampener removal
Ian Balcom 23:35 on 31 May 2005

Re: SER1 vibration dampener removal
Allan Harding 01:13 on 01 Jun 2005

Re: SER1 vibration dampener removal
Ian Balcom 02:21 on 01 Jun 2005

Re: SER1 vibration dampener removal
Allan Harding 03:59 on 01 Jun 2005

AW: SER1 vibration dampener removal
Ulrico Becker 13:48 on 01 Jun 2005

Re: SER1 vibration dampener removal
Patch 17:04 on 01 Jun 2005