Re: SER1 vibration dampener removal

[prev] [thread] [next] [Date index for 2005/05/31]

Is the starter dog thredded normally?  Either it is being very
stubborn or I am turning it the wrong way..

Thanks,
Ian

On 5/30/05, Chris Storm <cstorm@xxxxxxxxx.xx.xx> wrote:
> Ian, Bend a piece of flatbar to sit flat on the flywheel and project over
> the bellhousing edges. Now bolt the flatbar to the flywheel and to the
> bellhousing.
> 
> Regards
> 
> Chris
> ----- Original Message -----
> From: "Ian Balcom" <ian.balcom@xxxxx.xxx>
> To: <series1@xxxxxxxxx.xxx>
> Sent: Monday, May 30, 2005 2:37 AM
> Subject: SER1 vibration dampener removal
> 
> 
> > Hi.
> >
> > I can't figure out how to take the vibration dampener/starter dog off
> > with the engine removed.  When I try to turn the big nut on the
> > starter dog it just turns the engine.
> >
> > Any ideas?
> >
> > Thanks,
> > Ian
> > '55 86"
> >
> >
> > To change subscription see www.landrover.net/series1/mail
> >
> 
> 
> To change subscription see www.landrover.net/series1/mail
> 
>


To change subscription see www.landrover.net/series1/mail