Re: SER1 vibration dampener removal

[prev] [thread] [next] [Date index for 2005/05/31]

From: Tomas Christie
Subject: Re: SER1 vibration dampener removal
Date: 23:32 on 31 May 2005

--------------B03518FAD045CD8AC134BBE3
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

These bolts normally need one sharp crack to break their hold and start
them turning and then they unndo freely. If that is not happening, be
carefull because you could do damage to something if you overdo it.

Tom C.

Allan Harding wrote:

>      It is right hand threaded, and strangely enough the thread is not
> BSF, it is 9/16" (from memory) UNF!!!, not that that helps you to undo
> it. Have you taken the suggested steps to prevent the crankshaft from
> turning? If you have and there has been no result, use a bigger hammer
> on your spanner. These bolt are frequently very tight.
>     Cheers
>     Allan
>     Canberra, Australia

--------------B03518FAD045CD8AC134BBE3
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<HTML>
<BODY TEXT="#000000" BGCOLOR="#FFFFFF">
These bolts normally need one sharp crack to break their hold and start
them turning and then they unndo freely. If that is not happening, be carefull
because you could do damage to something if you overdo it.

<P>Tom C.

<P>Allan Harding wrote:
<BLOCKQUOTE TYPE=CITE>&nbsp;&nbsp;&nbsp;&nbsp; It is right hand threaded,
and strangely enough the thread is not BSF, it is 9/16" (from memory) <B>UNF!!!,
</B>not that that helps you to undo it. Have you taken the suggested steps
to prevent the crankshaft from turning? If you have and there has been
no result, use a bigger hammer on your spanner. These bolt are frequently
very tight.
<BR>&nbsp;&nbsp;&nbsp; Cheers
<BR>&nbsp;&nbsp;&nbsp; Allan
<BR>&nbsp;&nbsp;&nbsp; Canberra, Australia</BLOCKQUOTE>
&nbsp;
</BODY>
</HTML>

--------------B03518FAD045CD8AC134BBE3--

To change subscription see www.landrover.net/series1/mail

(message missing)

SER1 vibration dampener removal
Ian Balcom 00:37 on 30 May 2005

Re: SER1 vibration dampener removal
Allan Harding 01:13 on 30 May 2005

Re: SER1 vibration dampener removal
Chris Storm 17:25 on 30 May 2005

Re: SER1 vibration dampener removal
Ian Balcom 14:52 on 31 May 2005

Re: SER1 vibration dampener removal
Chris Storm 20:45 on 31 May 2005

RE: SER1 vibration dampener removal
Tom Tollefson 21:25 on 31 May 2005

Re: SER1 vibration dampener removal
Allan Harding 22:18 on 31 May 2005

Re: SER1 vibration dampener removal
Tomas Christie 23:32 on 31 May 2005

Re: SER1 vibration dampener removal
Ian Balcom 23:35 on 31 May 2005

Re: SER1 vibration dampener removal
Allan Harding 01:13 on 01 Jun 2005

Re: SER1 vibration dampener removal
Ian Balcom 02:21 on 01 Jun 2005

Re: SER1 vibration dampener removal
Allan Harding 03:59 on 01 Jun 2005

AW: SER1 vibration dampener removal
Ulrico Becker 13:48 on 01 Jun 2005

Re: SER1 vibration dampener removal
Patch 17:04 on 01 Jun 2005