Re: SER1 vibration dampener removal

[prev] [thread] [next] [Date index for 2005/06/01]

From: Ian Balcom
Subject: Re: SER1 vibration dampener removal
Date: 02:21 on 01 Jun 2005

got it! thanks! what a grumpy dog!

Can you suggest things to be looking for as far as condition of the
timing belt and associated mechanisms?

It looks good so far, but I am not sure how much tension there should
be on the chain.

Also can you tell me how I can tell if the clutch needs to be
replaced?  What thinkness should the disk be?

Thanks very Much,
Ian

On 5/31/05, Allan Harding <Allan.Harding@xxx.xxx.xx> wrote:
>      No,
>      Turn the bolt anti-clockwise to undo it (when standing in front of the
> vehicle facing it,). It is a normal right hand threaded bolt. Hope you have
> not been making it tighter for the best part of  a week.
>      Cheers
>      Allan
>      Canberra, Australia
>  

--

To change subscription see www.landrover.net/series1/mail

(message missing)

SER1 vibration dampener removal
Ian Balcom 00:37 on 30 May 2005

Re: SER1 vibration dampener removal
Allan Harding 01:13 on 30 May 2005

Re: SER1 vibration dampener removal
Chris Storm 17:25 on 30 May 2005

Re: SER1 vibration dampener removal
Ian Balcom 14:52 on 31 May 2005

Re: SER1 vibration dampener removal
Chris Storm 20:45 on 31 May 2005

RE: SER1 vibration dampener removal
Tom Tollefson 21:25 on 31 May 2005

Re: SER1 vibration dampener removal
Allan Harding 22:18 on 31 May 2005

Re: SER1 vibration dampener removal
Tomas Christie 23:32 on 31 May 2005

Re: SER1 vibration dampener removal
Ian Balcom 23:35 on 31 May 2005

Re: SER1 vibration dampener removal
Allan Harding 01:13 on 01 Jun 2005

Re: SER1 vibration dampener removal
Ian Balcom 02:21 on 01 Jun 2005

Re: SER1 vibration dampener removal
Allan Harding 03:59 on 01 Jun 2005

AW: SER1 vibration dampener removal
Ulrico Becker 13:48 on 01 Jun 2005

Re: SER1 vibration dampener removal
Patch 17:04 on 01 Jun 2005