RE: SER1 Lab Prep

[prev] [thread] [next] [Date index for 2005/07/13]

From: Tom Tollefson
Subject: RE: SER1 Lab Prep
Date: 20:07 on 13 Jul 2005

crank handle is same as series 2/3

For spares , maybe a master cyl rebuild kit,bug spray, lots of bugspray,
DEET is Your friend!
My dynamo crapped out on the way up to James bay this winter, the front
bearing went. I had a spare with me in anticipation of trouble. It is , of
course better to leave with a good Dynamo in the first place.
Tom

-----Original Message-----
From: series1-host@xxxxxxxxx.xxx [mailto:series1-host@xxxxxxxxx.xxx]On
Behalf Of George E Sollish
Sent: July 13, 2005 3:18 PM
To: series1@xxxxxxxxx.xxx
Subject: Re: SER1 Lab Prep

Hi Wayne,

Good point.  I'm already chasing one, along with extra points, rotor and
condenser.

Anyone have a spare crank handle for a 2.0 or the dimensions thereof?

George E Sollish	Chief Engineer		Auto Gear Equipment
 			Project Manager		The Payne Lake Project

On Wed, 13 Jul 2005 wperrin@xxxxxxx.xxx wrote:

> Date: Wed, 13 Jul 2005 14:49:14 -0400
> From: wperrin@xxxxxxx.xxx
> Reply-To: series1@xxxxxxxxx.xxx
> To: series1@xxxxxxxxx.xxx
> Subject: Re: SER1 Lab Prep
>
> George,

> If you have an ancient bakelite distributor cap, that is a vulnerable
> part and a spare would be good to have.  It took me a long time to track
> one down so unless you have updated your ignition they are not easy to
> find when you are stranded.

> Wayne

To change subscription see www.landrover.net/series1/mail

To change subscription see www.landrover.net/series1/mail