RE: SER1 old flasher switch with hazardrelay ?

[prev] [thread] [next] [Date index for 2004/12/10]

From: Tom Tollefson
Subject: RE: SER1 old flasher switch with hazardrelay ?
Date: 14:52 on 10 Dec 2004

Very interested, let's have a diagram in the Series 1 Garage.

Tom Tollefson

-----Original Message-----
From: series1-host@xxxxxxxxx.xxx [mailto:series1-host@xxxxxxxxx.xxx]On
Behalf Of Valentin Nemeth
Sent: December 10, 2004 8:00 AM
To: series1@xxxxxxxxx.xxx
Subject: Re: SER1 old flasher switch with hazardrelay ?

Hi,

I'm in the process of setting up hazards in my 86" too. I simply
bought a 4-circuit-single-coil type 12V relais from my corner hardware
store (ZAR 38 = approx GBP 3.50), tapped into the flasher lights'
circuits bypassing the indicator switch. (Used one circuit for left
had, one for right-hand side, one for supplying power to the flasher
unit when ignition is off and left the 4th unused. They didn't have
3-circuit relais.). The coil is then operated with a dash mounted
switch.

When the switch is off all circuits are open, which makes the system
work as originally designed.

When the switch is on, the coil is activated, all circuits close and
thus power is supplied to the flasher unit from which the 'lamps' are
supplied through the bypass. It seems to work ok. I can try to
scribble up a wiring diagram and take some pics of the set-up if
anyone interested.

With a little black box to hide the unsightly relais, connectors, etc.
my total cost was about ZAR 70 (approx GBP 6.50).

Cheers,

V.

To change subscription see www.landrover.net/series1/mail

To change subscription see www.landrover.net/series1/mail

(message missing)

SER1 Welsh/frost-plugs
21:00 on 06 Sep 2004

Re: SER1 Welsh/frost-plugs
GRAHAM WOOD 21:22 on 06 Sep 2004

Re: SER1 Welsh/frost-plugs
MARTIN 20:14 on 07 Sep 2004

Re: SER1 Welsh/frost-plugs
Ian Stuart 08:25 on 09 Sep 2004

SER1 front floor panels - dry or with any protection ?
Brett Pritt 23:54 on 17 Nov 2004

Re: SER1 front floor panels - dry or with any protection ?
RUJAMESH 01:07 on 18 Nov 2004

Re: SER1 front floor panels - dry or with any protection ?
Diana Alan 00:59 on 19 Nov 2004

Re: SER1 front floor panels - dry or with any protection ?
Allan Harding 01:07 on 19 Nov 2004

Re: SER1 front floor panels - dry or with any protection ?
Mark Love 02:10 on 18 Nov 2004

AW: SER1 front floor panels - dry or with any protection ?
Ulrico Becker 17:32 on 18 Nov 2004

Re: SER1 front floor panels - dry or with any protection ?
Allan Harding 22:05 on 18 Nov 2004

SER1 old flasher switch with hazardrelay ?
Brett Pritt 16:07 on 09 Dec 2004

Re: SER1 old flasher switch with hazardrelay ?
Bob Phillips 17:56 on 09 Dec 2004

RE: SER1 old flasher switch with hazardrelay ?
Peter Stone 20:39 on 09 Dec 2004

RE: SER1 old flasher switch with hazardrelay ?
Brett Pritt 06:25 on 10 Dec 2004

Re: SER1 old flasher switch with hazardrelay ?
Mark STRANGWAYS 17:04 on 12 Dec 2004

SER1 pedalshaft measure for lathe ?
Brett Pritt 14:22 on 05 Jan 2005

AW: SER1 old flasher switch with hazardrelay ?
Ulrico Becker 10:10 on 11 Dec 2004

Re: SER1 old flasher switch with hazardrelay ?
Diana Alan 10:38 on 11 Dec 2004

SER1 fuel problem?
Brett Pritt 11:50 on 18 May 2005

Re: SER1 fuel problem?
Andreas Demosthenous 11:56 on 18 May 2005

Re: SER1 fuel problem?
Brett Pritt 13:11 on 18 May 2005

RE: SER1 fuel problem?
Tom Tollefson 12:42 on 18 May 2005

Re: SER1 fuel problem?
Anthony Brain 21:38 on 18 May 2005

Re: SER1 old flasher switch with hazardrelay ?
Valentin Nemeth 12:59 on 10 Dec 2004

RE: SER1 old flasher switch with hazardrelay ?
Tom Tollefson 14:52 on 10 Dec 2004

SER1 Where is Santa?
Brett Pritt 20:26 on 23 Dec 2004

SER1 round Smith heater restauration
Brett Pritt 10:56 on 27 Dec 2004

Re: SER1 round Smith heater restauration
Allan Harding 03:41 on 29 Dec 2004

SER1 How to start an engine after 30 years?
Ulrico Becker 07:41 on 30 Dec 2004

RE: SER1 How to start an engine after 30 years?
Nick Condon 08:59 on 30 Dec 2004

Re: SER1 How to start an engine after 30 years?
Allan Harding 22:05 on 30 Dec 2004

AW: SER1 How to start an engine after 30 years?
Ulrico Becker 09:35 on 09 Jan 2005

Re: SER1 How to start an engine after 30 years?
Wayne Perrin 13:48 on 30 Dec 2004

AW: SER1 How to start an engine after 30 years?
Ulrico Becker 09:35 on 09 Jan 2005

SER1 Truck cab for SI 80"
Ulrico Becker 09:35 on 09 Jan 2005

AW: SER1 old flasher switch with hazardrelay ?
Ulrico Becker 07:52 on 14 Dec 2004

Re: SER1 old flasher switch with hazardrelay ?
Verity 15:37 on 14 Dec 2004

RE: SER1 How to start an engine after 30 years?
Nick Condon 13:14 on 01 Jan 2005

Re: SER1 fuel problem?
Tom Wykes 13:25 on 18 May 2005